How to Make a USB Bootable

Here is easy  method  to make bootable pen-drive on window 7  or 8
Follow these guidelines  to get the Windows install files onto a bootable USB flash drive.


1 : Plug-in your pen drive in Laptop/Desktop.
2 : Go to Start  >> Type Cmd  (in search program and file)  [Press Enter]
After pressing Enter command prompt will open.
On your Caps lock
3 :Type  DISKPART   [Press Enter]

4 :Type  LIST  DISK    [Press Enter]
It will show all available disk in your system. Disk 0 is usually hard disk of your system. In my case Disk 1 is USB pen drive (This can be different in your case so plz make sure )
5 :Type  SELECT  DISK  1  [Press Enter]
6 :Type  CLEAN  [Press Enter]
7 :Type  CREATE  PARTITION  PRIMARY   [Press Enter]
8 :Type  SELECT  PARTITION  1  [Press Enter]
9 :Type  ACTIVE  [Press Enter]
10 :Type FORMAT  FS=NTFS  [Press Enter]
Wait Until 100% complete.
11 :Type  ASSIGN  [Press Enter]
12 :Type EXIT [Press Enter]
Boo table Usb Pen drive Now boo table usb pen drive is ready to use. After making this copy and paste windows 7 or 8 in your pen drive. It is easiest way to install windows 7 or 8 in your  system.
When you want to install windows, plug-in boot able pen drive and restart the system and press boot function key as per different system (f1——-f12) .
Note :
Before making bootable USB pen drive plz make sure that you are using only one Pen drive at this time. This process is only for windows 7 or 8 not for Xp.